|
· Gas version made in the USA - Diesel version assembled in the USA
· Ergonomic joystick allows one-handed control of traverse and cutting depth
· Quick release, auto latching bayonet mount blade guard
· Enclosed blade shaft with oil bath lubrication system
· 3 position adjustable solid steel handle bars
· Blade guard has garden hose style connector for quick disconnecting
· Telescoping front pointer
· Instrumentation includes engine tach, fuel level and hour meter
· Indicator lights for oil pressure, cylinder head temperature, parking brake, headlight and low battery voltage
· Blade protection system shuts down engine during wet cutting if water pressure drop is detected
· Depth of cut indicator
· Separate valve controls for blade guard and wash down spray head
· 24", 30" and 36" blade guard kits available
· Saw designed for left or right side mounting of blade and blade guard
· Blade guard water distribution system designed for optimal blade cooling
· Lifting bail
· Manually operated disc parking brake
· Positive depth stop
· Removable rear and side panels for easy service
· Center shaft blade drive system with Polychain positive displacement belt from engine to center shaft
· 7M Poly-V belt final drive from center shaft to blade shaft
· Electrohydraulic pump raises blade, user adjustable valve for setting blade lowering rate
· Wide front wheel base increases stability and allows ramp loading/unloading
· Eaton model 6 Hydrostatic transmission coupled to an MK differentiating trans-axle
· Differential Lock for cutting on slippery surfaces
· Transmission can be disengaged from axle to allow saw to be pushed manually
· Travel speed 0-220 FPM forward, 0-100 FPM reverse
· Neutral start switch to prevent starting with transmission in gear
|
